Le coffret est fabriqué dans notre usine de fabrication CNC, où plusieurs machines de poinçonnage, de découpe et de pliage à commande numérique informatisée sont utilisées pour réaliser les conceptions inventées par nos spécialistes en ingénierie sur des tôles métalliques de haute qualité.
– Le coffret est peint avec des peintures durables traitées thermiquement et revêtues par poudre aux couleurs standard de notre marque : blanc et noir
– Le câblage d’entrée et de sortie du tableau protège les faisceaux scellés et flexibles qui sont connectés au tableau par des presse-étoupes.
– Les conceptions des tableaux, les couleurs, le câblage et/ou toute demande spéciale supplémentaire peuvent être personnalisés et appliqués selon les exigences du client après leur étude de faisabilité par notre département R&D.

Control Panels

Sort By
Catégories
Sub-Categories

GMP103MK (DSE3110) panel is an automatic start generating set panel of microprocessor based design. It is fully configurable by front fascia buttons and PC software as well. The controller is capable of reading engine speed through MPU sensor or frequency sensing. It is an option to have CANbus J1939 version.

Notes

Note 1: Some OPTIONAL features could be standard is CANbus is established within electronic engines.
Note 2: Low coolant level protection is standard feature for Gensets above 200KVA, otherwise it is optional.

Note 3: There is limitation in the number of protections and measurements that can be offered with DSE3110. Note 4: Most of the instrumentation features and options are analogue.

GMP204 (DSE7310) panel is an automatic start generating set panel of microprocessor based design which is capable of interfacing with electronic engine through the can-bus J1939. It is fully configurable by PC. If Mains voltage is to be monitored, DSE7320 can be offered.

Notes

Note 1: Some OPTIONAL features could be standard if there is CANbus is established with electronic engines

Note 2: Low coolant level protection is standard feature for genset above 200KVA, otherwise it is optional.

Note 3: This is to be mentioned during ordering

GMP205 (DSE7410) panel is an automatic start generating set panel of microprocessor based design which is capable of interfacing with electronic engine through the can-bus J1939. The basic configuration can be done from front, but It is fully configurable by PC. If Mains voltage is to be monitored, DSE7420 can be offered.

Notes

Note 1: Some OPTIONAL features could be standard if there is CANbus is established with electronic engines

Note 2: Low coolant level protection is standard feature for genset above 200KVA, otherwise it is optional.

Note 3: This is to be mentioned during ordering

GMP260MK (DSE6010 MKII) panel is an automatic start generating set panel of microprocessor based design which is capable of interfacing with electronic engine through the can-bus J1939. It is fully configurable by front fascia buttons and PC software as well. If Mains voltage is to be monitored, DSE6020MKII can be offered.

Notes

Note 1: some OPTIONAL features could be standard if there is CANbus is established with electronic engines

Note 2: Low coolant level protection is standard feature for genset above 200KVA, otherwise it is optional.

Note 3: There is limitation in the number of protections and measurements that can be offered with GMP260MK.

GMP504(DSE8810) panel is built-in Synchronizing and load-sharing panel that can work to parallel about 32sets together in one MSC link. It could be to parallel with Mains on fixed export mode. The panel is still used to operate gensets with high specs of control and Protection.


Notes

Note 1: Some OPTIONAL features could be standard if there is CANbus is established with electronic engines

Note 2: Low coolant level protection is standard feature for genset above 200KVA, otherwise it is optional.

Note 3: This is to be mentioned during ordering

In accordance with the company’s vision based on innovation, quality and partnership, GHADDAR Machinery Co. S.A.L. expended its areas of expertise into the Medium Voltage arena by showing and proving its complete readiness to achieve medium voltage power stations as complete turnkey projects.

High voltage power stations comprise of:
High voltage / low voltage generating sets.
High voltage switchgears.
Synchronizing/load-sharing panels.
Step up and/or step down transformers.

H.V. Power station in Al-Rashid Hotel-Baghdad Iraq.
5MVA, 4MW, 11KV, 50Hz, 3phase/3wire.

It includes 3 generating sets : 2 x 2MVA + 1MVA, in addition to synchronizing/load sharing panel, totalizing switchgear output ring unit.
Installed January-2005.

GHADDAR MACHINERY CO. is specialized in designing and manufacturing a wide range of LV control panels using the latest technological advancements in the filed of programmable microprocessor control units comprising.

 Synchronizing & Paralleling Systems





Totalizing Panels

Distribution Panels

Automatic Transfer Switches