– Le coffret est peint avec des peintures durables traitées thermiquement et revêtues par poudre aux couleurs standard de notre marque : blanc et noir
– Le câblage d’entrée et de sortie du tableau protège les faisceaux scellés et flexibles qui sont connectés au tableau par des presse-étoupes.
– Les conceptions des tableaux, les couleurs, le câblage et/ou toute demande spéciale supplémentaire peuvent être personnalisés et appliqués selon les exigences du client après leur étude de faisabilité par notre département R&D.
Control Panels
GMP103MK (DSE3110) panel is an automatic start generating set panel of microprocessor based design. It is fully configurable by front fascia buttons and PC software as well. The controller is capable of reading engine speed through MPU sensor or frequency sensing. It is an option to have CANbus J1939 version.
Notes
Note 1: Some OPTIONAL features could be standard is CANbus is established within electronic engines.
Note 2: Low coolant level protection is standard feature for Gensets above 200KVA, otherwise it is optional.
Note 3: There is limitation in the number of protections and measurements that can be offered with DSE3110. Note 4: Most of the instrumentation features and options are analogue.
GMP204 (DSE7310) panel is an automatic start generating set panel of microprocessor based design which is capable of interfacing with electronic engine through the can-bus J1939. It is fully configurable by PC. If Mains voltage is to be monitored, DSE7320 can be offered.
Notes
Note 1: Some OPTIONAL features could be standard if there is CANbus is established with electronic engines
Note 2: Low coolant level protection is standard feature for genset above 200KVA, otherwise it is optional.
Note 3: This is to be mentioned during ordering
GMP205 (DSE7410) panel is an automatic start generating set panel of microprocessor based design which is capable of interfacing with electronic engine through the can-bus J1939. The basic configuration can be done from front, but It is fully configurable by PC. If Mains voltage is to be monitored, DSE7420 can be offered.
Notes
Note 1: Some OPTIONAL features could be standard if there is CANbus is established with electronic engines
Note 2: Low coolant level protection is standard feature for genset above 200KVA, otherwise it is optional.
Note 3: This is to be mentioned during ordering
GMP260MK (DSE6010 MKII) panel is an automatic start generating set panel of microprocessor based design which is capable of interfacing with electronic engine through the can-bus J1939. It is fully configurable by front fascia buttons and PC software as well. If Mains voltage is to be monitored, DSE6020MKII can be offered.
Notes
Note 1: some OPTIONAL features could be standard if there is CANbus is established with electronic engines
Note 2: Low coolant level protection is standard feature for genset above 200KVA, otherwise it is optional.
Note 3: There is limitation in the number of protections and measurements that can be offered with GMP260MK.
GMP504(DSE8810) panel is built-in Synchronizing and load-sharing panel that can work to parallel about 32sets together in one MSC link. It could be to parallel with Mains on fixed export mode. The panel is still used to operate gensets with high specs of control and Protection.
Notes
Note 1: Some OPTIONAL features could be standard if there is CANbus is established with electronic engines
Note 2: Low coolant level protection is standard feature for genset above 200KVA, otherwise it is optional.
Note 3: This is to be mentioned during ordering